200mm parabolic aluminium reflector with special gold-brown coating

half-ball diffusor dome distributing light evenly from RGBW LED source inside of the reflector

Colour mixing mode RGBW or CMY

Variable CTO: 2.700K - 8.000K

Virtual Colour Wheel: with 66 preset swatches

Pre-programmed pixel effects with colour, dimming and strobe chases, waves and pulses at variable speed and direction

Shutter: Electronic with variable speed strobe (max. 20 flashes per second)

Pre-programmed random strobe & pulse effects

High resolution electronic dimming: 0 - 100%

PATT Driver: external

Setting & Addressing: two-row LCD display & 4 control buttons

Protocols: USITT DMX-512, RDM, ArtNet, Kling-Net, sACN

Wireless CRMX™ technology from Lumen Radio: On request

DMX Protocol modes: 6

Control channels: 13, 32, 40, 47, 53, 60

RGBW or CMY: 8 or 16 bit (internal 18 bit)

Dimmer: 8 or 16 bit (internal 18 bit)

Maximum ambient temperature: 45 °C (113 °F)

Maximum surface temperature: 70 °C (158 °F)

Minimum operating temperature: -5 °C (23 °F)

PATT Driver:

• Power supply: Electronic auto-ranging

• Input voltage range: 100 - 277 V, 50/60 Hz

• Power consumption: 240 W

• Power in/out connector: Neutrik powerCON TRUE1 in/out

• DMX and RDM data in/out: Locking 3-pin & 5-pin XLR

• Embeded Ethernet switch 10/100 Mbps: 1x IN/1x Out

• Ethernet port in/out: RJ45

• Power and Data out: Locking 4-pin XLR (from PATT Driver to the onePATT)

onePATT:

• Power and Data in: Locking 4-pin XLR

CE Compliant

cETLus Compliant (pending)

onePATT:

• Height: 321 mm (12.6”)

• Width: 309 mm (12.1”)

• Depth: 150 mm (5.9”)

• Weight: 1.6 kg (3.5 lbs)

PATT Driver:

• Height: 358 mm(14.1")

• Width: 82 mm (3.2")

• Depth: 162 mm (6.4")

• Weight: 3.0 kg (6.6 lbs)

Ingress protection rating: IP20

Mounting points:

• Driver: 1x Half-couple clamp, 1x Safety attachment point

• onePATT: 1x 13mm hole for Clamp mounting

Operating position:

• PATT Driver: Floor standing on mounted on truss in vertical position

• onePATT: any operating and mounting position

User Manual

PATT Driver:

• Standard version 10055002

• Wireless version 10055004

Doughty Trigger Clamp: 17030386

Safety wire 36 kg: 99011963

Mains Cable powerCON TRUE1 In/Schuko, 2m, Indoor: 13052405

Mains Cable powerCON TRUE1 In/US, 2m, Indoor: 13052406

Mains Cable powerCON TRUE1 In/CEE 16A, 2m, Indoor: 13052445

Mains Cable powerCON TRUE1 In/Open ended, 2m, Indoor: 13052407

Daisy Chain powerCON TRUE1 In/Out, EU, 2m, Indoor: 13052439

Daisy Chain powerCON TRUE1 In/Out, US, 2m, Indoor: 13052440

Daisy Chain powerCON TRUE1 In/Out, EU, 5m, Indoor: 13052444

Data cable 4-pin XLR 10m, ferite, EU: 13052797

Data cable 4-pin XLR 5m, ferite, EU: 13052798

Data cable 4-pin XLR 10m, ferite, US: 13052799

Data cable 4-pin XLR 5m, ferite, US: 13052800

onePATT Top Loader Case 7-pack set: 10120231

onePATT™ is a trademark of Robe lighting s.r.o.

onePATT™ is patented by Robe lighting s. r. o. and is protected by one or more pending or issued patents