550mm parabolic aluminium reflector with high reflectivity coating

Diffusor dome distributing light evenly from RGBW LED source inside of the reflector

Colour mixing mode RGBW or CMY

Individual control of each RGBW pixel

Variable CTO: 2.700K - 8.000K

Virtual Colour Wheel: with 66 preset swatches

Pre-programmed pixel effects with colour, dimming and strobe chases, waves and pulses at variable speed and direction

Shutter: Electronic with variable speed strobe (max. 20 flashes per second)

Pre-programmed random strobe & pulse effects

High resolution electronic dimming: 0 - 100%

PATT Driver: external

Setting & Addressing: two-row LCD display & 4 control buttons

Protocols: USITT DMX-512, RDM, ArtNet, Kling-Net, sACN

Wireless CRMX™ technology from Lumen Radio - on request

DMX Protocol modes: 6

Control channels: 13, 32, 40, 47, 53, 60

RGBW or CMY: 8 or 16 bit (internal 18 bit)

Dimmer: 8 or 16 bit (internal 18 bit)

Maximum ambient temperature: 45 °C (113 °F)

Maximum surface temperature: 65 °C (149 °F)

Minimum operating temperature: -5 °C (23 °F)

PATT Driver:

• Power supply: Electronic auto-ranging

• Input voltage range: 100 - 277 V, 50/60 Hz

• Power consumption: 240 W

• Power in/out connector: Neutrik powerCON TRUE1

• in/out DMX and RDM data in/out: Locking 3-pin & 5-pin XLR

• Embeded Ethernet switch 10/100 Mbps: 1x IN/1x Out

• Ethernet port in/out: RJ45

• Power and Data out: Locking 4-pin XLR (from PATT Driver to the pixelPATT)

PATT2017:

• Power and Data in: Locking 4-pin XLR

CE Compliant

cETLus Compliant (pending)

PATT Driver:

• Height: 358 mm(14.1")

• Width: 82 mm (3.2")

• Depth: 162 mm (6.4")

• Weight: 3.0 kg (6.6 lbs)

PATT2017:

• Height: 680 mm (26.77”)

• Width: 695 mm (27.4”)

• Depth: 356 mm (14”)

• Weight: 10.3 kg (22.7 lbs)

Ingress protection rating: IP20

Mounting points:

• Driver: 1x Half-couple clamp, 1x Safety attachment point

• PATT2017: M12 mounting for clamp or spigot

Operating position:

• PATT Driver: Floor standing on mounted on truss in vertical position

• PATT2017: any operating and mounting position

User Manual

PATT Driver:

• Standard version 10055002

• Wireless version 10055004

Floor stand: 10980259

Tripod: 10980374

Spigot: 10980260

Doughty Trigger Clamp: 17030386

Safety wire 36 kg: 99011963

Mains Cable powerCON TRUE1 In/Schuko, 2m, Indoor: 13052405

Mains Cable powerCON TRUE1 In/US, 2m, Indoor: 13052406

Mains Cable powerCON TRUE1 In/CEE 16A, 2m, Indoor: 13052445

Mains Cable powerCON TRUE1 In/Open ended, 2m, Indoor: 13052407

Daisy Chain powerCON TRUE1 In/Out, EU, 2m, Indoor: 13052439

Daisy Chain powerCON TRUE1 In/Out, US, 2m, Indoor: 13052440

Daisy Chain powerCON TRUE1 In/Out, EU, 5m, Indoor: 13052444

Data cable 4-pin XLR 10m, ferite, EU: 13052797

Data cable 4-pin XLR 5m, ferite, EU: 13052798

Data cable 4-pin XLR 10m, ferite, US: 13052799

Data cable 4-pin XLR 5m, ferite, US: 13052800

Single Top Loader Case: 10120224

Dual Top Loader Case: 10120225

PATT 2017™ is a trademark of Robe lighting s.r.o.

PATT 2017™ is patented by Robe lighting s. r. o. and is protected by one or more pending or issued patent